From Eau Gallie to the airport district

Epoxy Flooring in Melbourne, FL

Coatings matched to the age of your slab, the rain this city gets and how you actually use the space.

Free estimates at your property, with the concrete measured by us in person
Moisture test on the concrete before any coating goes down
Written quote that lists every prep step, coat and cost

Every Decade of Concrete, in One City

Epoxy flooring in Melbourne has to account for a housing stock that spans most of the last century. Census survey data compiled by Point2Homes puts the city's median construction year at 1985, yet roughly 11% of homes date to the 1950s and 13.5% to the 2000s. A garage in an older Eau Gallie street and one in a newer subdivision near the airport can need very different prep, so we look at the slab before we suggest a system.

Why the build year matters

Older concrete was often poured without a vapor barrier underneath. It may carry decades of oil, old paint or sealer, and small settlement cracks. Newer slabs tend to be flatter and cleaner but can be dense and slick on top from the finishing trowel. Both need a diamond grind to open the surface, but the older floor usually needs more patching, and we say so in the written quote rather than surprising you on install day.

Fifty-one inches of rain a year

Melbourne averages about 51 inches of rainfall annually, and most of it falls in afternoon storms between late May and October. Tropical Storm Fay set a city rainfall record here in 2008. Water that pools against a garage apron or wicks up through a slab is the main reason coatings peel here. Every floor gets a moisture test, and when the readings warrant it we switch to a vapor-tolerant primer.

Get a Free Estimate

Renters and landlords

Roughly 40% of occupied homes in Melbourne are rented. Owners of rental houses often ask for a floor that hides wear and cleans up fast between tenants. A full broadcast of vinyl flake under a clear polyaspartic topcoat does that well, and it keeps the slab from soaking up the next tenant's oil drips.

Work floors for a tech city

Defense and technology firms cluster here, and L3Harris lists its headquarters in Melbourne. Labs, assembly rooms, hangars and warehouses tend to need thicker 100% solids epoxy, chemical-resistant topcoats and painted aisle lines. We schedule commercial work around shifts so a floor can be done in sections.

Melbourne Facts That Shape a Floor

Wide range of build years. Median construction year is 1985, with about 11% of homes from the 1950s and 13.5% from the 2000s (ACS 2019-2023 via Point2Homes).
Heavy wet season. Around 51 inches of rain fall in an average year, most of it in afternoon thunderstorms from late May through October.
Record storm rainfall. Tropical Storm Fay set a rainfall record for Melbourne during the week of August 22, 2008.
A large rental share. Owner-occupied homes make up about 59.7% of occupied housing, with renters in the other 40.3% (ACS 2019-2023 via Point2Homes).

One-Day Polyaspartic Floors in Melbourne, FL

Our Services in Melbourne, FL

Melbourne Questions

My Melbourne house was built in the 1950s. Can the garage still be coated?

In most cases, yes. A slab that old often needs extra grinding, crack repair and a moisture reading, since many were poured with no vapor barrier. That prep is priced in writing before any work begins.

Will summer storms keep you from installing?

Rain matters more for the curing window than for the coating itself. We watch the forecast, keep the garage door closed during cure where we can, and reschedule if humidity would put the finish at risk.

Which finish suits a rental garage?

We usually suggest full-broadcast flake sealed under polyaspartic. It masks scuffs, resists oil and cleans up quickly between tenants.

Do you coat floors for tech and aerospace businesses?

Yes. Our heavier commercial systems use topcoats that resist chemicals, plus safety striping, and work in phases so your operation stays open.

Free Estimates in Melbourne, FL

Anywhere in Melbourne, Eau Gallie to the airport, we will look at your slab and quote it free.

Call (772) 794-8152 Free Estimate