Pool Deck Resurfacing in Melbourne, FL

Pool Deck Resurfacing in Melbourne, FL is about three things: grip for wet bare feet, a surface that is not painfully hot at midday, and a finish that survives full sun, pool chemicals and heavy summer rain. Outdoor concrete here takes more punishment than any garage. Pool decks crack and pit, old coatings flake and fade, and the deck around a pool built decades ago often looks tired long before the pool itself needs work. Resurfacing puts a new wearing surface on the existing slab, which costs far less than tearing out and pouring new concrete.

Why plain epoxy is not the answer outside

A glossy indoor epoxy is the wrong product for a sunny pool deck. It yellows under UV, it is slick when wet and it can get hot. For outdoor work we use systems made for it: acrylic-modified cement overlays with a knockdown or spray texture, cool-deck style finishes, and UV-stable polyaspartic or similar coatings with grit broadcast in. According to HomeGuide, Kool Deck is non-slip and helps bring down the surface temperature, which is why it remains so common around Florida pools.

Choosing a surface

A knockdown or splatter texture in a light color stays cooler and grips well, and suits most family pool decks. A decorative overlay can add a stone or tile look, or a stamped pattern, at a higher price. A polyaspartic flake system works well on covered lanais and screened patios where some shade keeps the surface cooler. Sealing alone, the cheapest option, refreshes color and protects a deck that is in sound shape. We will tell you honestly which of these your deck can support.

Coastal conditions

On the barrier island, in Indialantic, Melbourne Beach, Satellite Beach and Indian Harbour Beach, decks sit between the ocean and the lagoon at low elevation, with salt in the air and sand on every foot. Inland, in Palm Bay, West Melbourne and Viera, the challenges are more about sun, heavy rain and runoff from screen enclosures. Either way, standing water is the enemy. Before resurfacing, we look at where water pools, how the deck slopes toward drains and whether any section has settled. Fixing slope and drainage, where possible, is part of a good resurfacing job.

Prep and repairs

The old surface is pressure washed and ground or stripped where it is loose. Cracks are cut out and filled, spalled areas patched, and expansion joints cleaned and resealed with a flexible sealant so the deck can move in the heat without cracking the new surface. Coping edges and steps get extra attention, since that is where bare feet and pool water meet. Work is timed between afternoon storms, since a summer downpour on a fresh overlay ruins the texture.

Lanais and patios

The same approach works for patios, screened lanais and front walks. HomeGuide puts a 200 to 400 square foot patio at $800 to $4,000. Covered areas can take a wider range of finishes, including flake, because they are shaded from the worst of the heat.

Weather and the outdoor schedule

Melbourne has a hot and wet season from late May through October and a warm, drier season from November through April. Outdoor resurfacing is easiest in the dry months, when afternoon storms are rare and each coat can set before rain. In summer we plan around the forecast and work in the morning, and we keep tarps and a backup day ready. Wikipedia notes that about 80% of the city's land drains toward the Indian River Lagoon, which is a good reminder that runoff from a pool deck goes somewhere. We keep cleanup water and debris contained and do not wash prep slurry into storm drains.

Screen enclosures, lanais and HOAs

Many Melbourne-area pools sit inside an aluminum screen enclosure, which keeps leaves and bugs out but also traps heat and humidity on the deck. Those decks dry more slowly after rain, so we check moisture before coating. If you live in a community with a review committee, such as the Modifications Review Committee run by the Viera East Community Association, a change in deck color or finish may need approval. We can supply color samples and a written description of the system for you to submit. Get a free estimate

Keeping a resurfaced deck in shape

Rinse the deck regularly to remove pool chemicals, sand and salt. Keep the expansion joints sealed and recaulk them when the sealant starts to crack. Reseal a sealed or decorative surface on the schedule we give you, which depends on the product and how much sun the deck gets. Small cracks are easier and cheaper to fix early, so let us know if you see them.